How To Fix Casement Window Lock

Download Article

uPVC windows are more often than not a loftier-quality window model which doesn't need much aligning. uPVC windows typically have hinges and open up and outwards from the window frame (rather than traditional windows which slide upward within the window frame). If you're noticing drafts around the sides or bottom of your window, you may need to adjust the screws on the within of the window frame which raise or lower the meridian of the sash.

i
Inspect the bottom of the sash to see if it fits in the frame. Open up and close your uPVC window a few times. The lesser of the sash should slide smoothly into the window frame. If it doesn't, but instead sticks confronting the frame or seal, the windows needs its height raised.^[one]
- On the other mitt, if your uPVC window sash doesn't quite contact the window frame when shut, merely rests virtually ¹⁄₁₆ inch (0.xvi cm) to a higher place them, yous'll demand to lower the window's height.
- A window "sash" is the panel—typically made of multiple drinking glass panes—which raises and lowers to open the window.
2
Open the window completely. This will give you easy access to the small-scale screws that you lot'll need to loosen in guild to alter the window's height.^[ii]
- Since adjusting the window may accept fifteen-20 minutes, plan to do it on a rain-gratis day.
Advert
iii
Loosen the four screws holding the uPVC casement to the left side of the frame. Once the window is opened, yous volition come across iv small screws property a metal strip to the window frame. Loosen each of these screws virtually 1 full turn.^[3]
- The casement of a uPVC window is the metal strip which fastens directly to the wooden window frame. The hinges which let the window to be opened and shut also adhere to the casement.
- When adjusting the window's tiptop, do not loosen the screws holding the hinges to the frame.
4
Loosen the screws belongings the window casement to the correct side of the frame. Now that you've loosened screws on one side of the casement, loosen the screws on the right-hand side of the frame. Equally y'all did before, plow each spiral 1 total turn counterclockwise to loosen it.^[four]
- All 8 of the screws holding the window sash to the casement will near likely take a big Phillips caput screwdriver. If this doesn't fit, test out different sizes of Phillips head until yous notice ane that fits snugly into the screw.
five
Press or lift the window sash to adjust the height. Once the eight screws have been loosened, you volition be able to heighten or lower the height of the moveable window panel.^[5] Move the window a small increase downward (if the window hasn't been closing fully) or upward (if the window sticks against the frame when closing).
- You lot may need to support the weight of the window panel until the screws have been tightened again. If the console is very heavy, it may be pulled downward under its own weight.
half-dozen
Tighten the 8 screws once the sash has been adjusted. In one case the window has been adjusted, give each of the 8 screws that you previously loosened a full turn clockwise to tighten them. Then, shut the window a few times to ostend that it opens and closes properly.
- At this point, your uPVC window should fit snugly into the frame when closed.^[6] This will also stop any drafts that have been coming into your home through the unaligned window.

ane
Open your uPVC window and find the lock-adjustment caput. If your manner of uPVC window opens outwards, rather than upwards, you lot can move the lock on the sash forwards or backwards. Await on the lower half of the open up window sash, virtually halfway between the lock and the bottom of the sash.^[7]
- Adjusting the position of the lock volition help your window seal properly if the locked window has been lose and drafty or if the lock machinery doesn't quite catch and seal the window properly.
- This style of window is called a "long-bottom lock," and the part that lets you conform the lock's position is chosen the "head."
2
Insert an Allen wrench into the lock caput. On most brands of uPVC window, an Allen wrench is used to move the placement of the lock.^[viii]
- If yous don't already ain Allen wrenches, y'all can purchase a set of them at a local hardware store.
3
Turn the wrench clockwise or counterclockwise to motility the lock backwards or forward. Turning the wrench clockwise volition movement the lock backwards (farther out from the lock mechanism) and increase the pressure exerted on the window when locked. This will improve the seal and stop any drafts.^[nine]
- Turning the wrench counterclockwise will relax the pressure when the window is close. Try this approach if your window hasn't been locking fully, or requires a great deal of force to lock.

Advertising

Add New Question

Question

My UPVC sliding window is very hard to movement. How practise I conform it?

Drew Hawkins1

Customs Answer

Attempt opening upward the window completely and loosening the four screws on the left and right side of the frame. Then, raise or lower the elevation of the panel to adjust it. Once you're finished, tighten all 8 of the screws and then the window is held firmly in identify and close it.
Question

How exercise you fix a draughty uPVC window?

Drew Hawkins1

Customs Answer

You lot can try adjusting the lock position for a better seal. Open upward the window and locate the lock-adjustment caput. Use an Allen wrench to turn the lock backward to increase the force per unit area it exerts on the window when it's locked, which will create a tighter seal.
Question

Why is my uPVC window not closing properly?

Drew Hawkins1

Community Answer

You may demand to adjust the height of the window in the frame and so information technology closes properly. Open the window up all the manner and loosen the 4 screws on each side of the frame. Then move the window down a small amount and tighten all 8 of the screws. Close the window to see if information technology'southward fitting properly. You lot tin make more than adjustments every bit needed.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

In the U.Due south., uPVC is also commonly known as vinyl siding or rigid PVC. The material used to make uPVC is like in composition to PVC pipe, although uPVC is harder and less flexible.^[ten]

Thanks for submitting a tip for review!

About This Commodity

Article Summary Ten

If you desire to arrange the height of a uPVC window in its frame, start by opening the window completely. On each side of the frame, you will run into four small-scale screws belongings a metal strip to the wooden window frame. Loosen all 8 of these screws about i full turn, then carefully press or lift the window sash to adapt the height. Once the window has been adjusted, tighten the 8 screws to secure it in identify. Alternatively, if you want to adjust the lock position of your uPVC window for a better seal, open the window and locate the lock-adjustment head. So, insert the Allen wrench into the lock head and turn information technology clockwise, which will increment the pressure exerted on the window when it's locked. For more advice, including how to relax the pressure level on your uPVC window lock, proceed reading!

Did this summary aid you?

Thank you to all authors for creating a page that has been read 142,412 times.